A.CDP
B.LDP
C.RSVP
D.ospf
您可能感兴趣的试卷
你可能感兴趣的试题
A.Loading state
B.Two-way state
C.Exstart state
D.Full state
A.Established
B.Full
C.Connect
D.Active
A.show ip rou sum
B.sh ver
C.show diag
D.show config
A.两种模式:Frame-mode和cell-mode
B.一种模式:Frame-mode
C.一种模式:cell-mode
D.MPLS不分模式
A.收敛的速度
B.配置简便
C.支持变长掩码
D.大规模部署
A.debug ospf events
B.show ip ospf border-routers
C.show ip ospf neighbor
D.show ip ospf database
A.show ip traffic
B.show ip flow cache
C.show ip cache
D.None of the above
A.debug ospf events
B.show ip ospf border-routers
C.show ip ospf neighbor
D.show ip ospf database
A.Very reliable forwarding
B.Virtual routing forwarding instances
C.Vip redundancy features
D.Virtual routing format
A.show ip route
B.show ip cef
C.show ip bgp
D.show ip cache
最新试题
7750SR的网络接口test需要启用urpf的严格模式,请写相关命令及查看urpf状态的命令。
请写出7750路由器系统运行时间及1槽IOM启动时间的命令。
7750-1路由器有一用户ftp,密码为alcatel,loopback地址为221.130.208.249,现7750-2路由器要获得7750-1路由器上的new.cfg文件并保存到cf3,请写出在7750-2上获取7750-1上的相关命令。
7750SR的vpls业务下sdp无法up,请问可以用哪条命令来查看该sdp与vpls绑定后无法up的原因?
7750SR的1/1/1端口为network模式,null封装,现需要将1/1/1端口镜像到1/1/2端口,假定1/1/2端口已完成相关配置,请写出镜像的配置。假定镜像id为1.
请写出7750路由器显示系统cpu和内存使用情况的命令。
将7750的以太端口1/1/1,2/1/1进行捆绑,并封装为dot1q模式,请按顺序写出相应的配置。
7750SR路由器配置PIM-SM并将接口地址1.1.1.1定义为RP,允许225.0.0.0/24这个地址段注册,请写出PIM的配置。
请给7750路由器配置一个log 10,保存main日志文件到syslog服务器上,syslog服务器地址10.1.1.1。
现有2台NTP服务器,地址分别为10.1.1.1和10.1.1.2,其中地址为10.1.1.1的NTP服务器为主用,7750通过这二台NTP服务器同步时间,请写出7750的NTP配置命令