单项选择题在ISDN网络中,U接口定义在()之间。

A.TE1和NT2
B.TE2和TA
C.NT1和ISDN网络
D.NT1和NT2


您可能感兴趣的试卷

你可能感兴趣的试题

2.单项选择题下列是外部网关路由协议的是()。

A.rip
B.ospf
C.igrp
D.bgp
E.eigrp

3.单项选择题IP地址中,网络部分全0表示()。

A.主机地址
B.网络地址
C.所有主机
D.所有网络

4.单项选择题On point-to-point networks, OSPF hello packets are addressed to which address()。

A.127.0.0.1
B.172.16.0.1
C.192.168.0.5
D.223.0.0.1
E.224.0.0.5
F.254.255.255.255

5.单项选择题改变您的Quidway路由器名字为myrouter时,应输入什么命令?()

A.config myrouter
B.display myroter
C.sysname myrouter

6.多项选择题

Which of the following statements describe the network shown in the graphic?()

A.There are two broadcast domains in the network.
B.There are four broadcast domains in the network.
C.There are six broadcast domains in the network.
D.There are four collision domains in the network.
E.There are five collision domains in the network.
F.There are seven collision domains in the network.

8.多项选择题Which characteristics are representative of a link-state routing protocol? ()

A.provides common view of entire topology
B.exchanges routing tables with neighbors
C.calculates shortest path
D.utilizes event-triggered updates
E.utilizes frequent periodic updates

10.多项选择题Which two commands correctly verify whether port security has been configured on port FastEthernet 0/12 on a switch?()

A.SW1#show swithport port-security interface FastEthernet 0/12
B.SW1#show swithport port-secure interface FastEthernet 0/12
C.SW1#show port-secure interface FastEthernet 0/12
D.SW1#show running-config

最新试题

下列哪些是私有IP 地址的地址范围?()

题型:多项选择题

请参见图示。主机A 尝试与主机C 建立TCP/IP 会话。在尝试期间,路由器Y 的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为172.16.1.5而目的IP 地址为172.16.7.24的数据包。捕获该帧时,它的源MAC 地址是什么?()

题型:单项选择题

在路由器上使用Router#copy running-config startup-config 命令会产生什么效果?()

题型:单项选择题

请参见图示。下列哪组设备仅包含中间设备?()

题型:单项选择题

PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机。以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常?()

题型:单项选择题

请参见图示。主机A 和B 无法互相通信。此问题的原因是什么?()

题型:单项选择题

以下哪两种介质可提供高达1Gb/s 的带宽?()

题型:多项选择题

请参见图示。一台路由器(其路由表如图所示)收到发往192.168.1.4的数据包。路由器将如何处理该数据包?()

题型:单项选择题

请参见图示。电缆1和电缆2分别按照特定的物理层要求接线。哪三个网段使用电缆2?()

题型:多项选择题

请参见图示。某用户想要查看当前的配置。图中所示为ipconfig/all 命令的输出。从此输出可以得到哪三项结论?()

题型:多项选择题