A.Configure the EtherChannel as "desirable" first.
B.Assign all interfaces to the same VLAN.
C.Disable PortFast on the interfaces in the EtherChannels.
D.Disable all interfaces first.
E.Fast Ethernet and Gigabit Ethernet ports cannot be assigned to the same EtherChannel.
F.Fix cabling problems.
您可能感兴趣的试卷
你可能感兴趣的试题
A.Tunnel IPv6 over IPv4 to connect far-end IPv6 networks.
B.Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible.
C.Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible.
D.What is the meaning of EUI-64 and how does it work?
E.Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.
A.EIGRP will not be accepted when configured on the actual RIPv2 routers.
B.OSPF will no longer be used in the routing table, because you only have EIGRP internal routes running.
C.OSPF will no longer be used in the routing table, because you only have EIGRP external routes running.
D.RIPv2 will populate its RIP database but not its routing table, because you only have EIGRP external routes running.
E.RIPv2 will populate its RIP database but not its routing table, because you only have EIGRP internal routes running.
F.OSPF database will have RIPv2 routes.
A.The trunking configuration mode on Switch1 is set to Off.
B.The trunking configuration mode on the other end is set to On.
C.The trunking configuration mode on the other end is set to Desirable.
D.Cisco Discovery Protocol is not running on the other end.
E.There is a VTP domain name mismatch.
F.Switch1 does not support 802.1Q
A.BGP peers must be Layer 2-adjacent.
B.EBGP multihop is not configured.
C.The firewall is not configured to allow IP protocol 89.
D.The firewall is not configured to allow UDP 179.
A.route redistribution
B.import and export using route descriptors
C.import and export using route targets
D.Cisco MPLS Traffic Engineering
A.CEF
B.FIB
C.LFIB
D.IGP
A.interface bandwidth
B.interface delay
C.interface bandwidth and delay
D.hop count
E.bridge priority
A.mark VOIP traffic with IP precedence 6 and configure only ’fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the QoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VoIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
A.Designated Root Cost
B.bridge ID priority
C.max age
D.bridge ID MAC address
E.Designated Root Priority
F.forward delay
A.service timestamps log datetimec msec
B.logging timestamps msec
C.syslog timestamps hour minute second miliseconds
D.service logging timestamp msec
E.logging service timestamp msec
最新试题
Phase I and Phase II DMVPN differ in terms of which of these characteristics?()
Multicast is being deployed in the network, and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast, the network monitoring tools show periodic spikes in link utilization throughout the network, even in areas where the video application is not being used. What could be a possible cause?()
Which three are needed to run VRF lite for IPv6 on a router? ()
Which switch port error is an indication of duplex mismatches on 10/100/1000 IEEE 802.3u Gigabit Ethernet ports?()
IEEE 802.1w is a Rapid Spanning Tree Protocol (RSTP) that can be seen as an evolution of the 802.1 standard. What are the port roles described by 802.1w?()
Internet Protocol version 6 (IPv6) is the next-generation Internet Layer protocol for packet-switched internetworks and the Internet. IPv6 router solicitation is()
In GLBP, which router will answer on client ARP requests?()
You are the network administrator of an enterprise company that just deployed a global IP telephony environment. In order to guarantee good voice quality, you asked your provider to implement QoS on the CE routers of your MPLS network. On your LAN, you have also deployed QoS. Users, however, keep complaining about bad voice quality, and the provider does not see matches on the DSCP values that you have asked him to match upon. What is most likely the problem?()
Which router is doing LSA type 7 to type 5 translation,and why?()
f a Cisco switch is configured with VTPv1 in transparent mode, what is done with received VTP advertisements?()