A.Both RTA and RTB will do LSA7/5 translation,since they are both NSSA ABRs
B.RTA will do LSA7/5 translation,since it has the lower router ID
C.RTB will do LSA7/5 translation,since it has the higher router ID
D.The redistributing router will do LSA7/5 translation,since it is within the NSSA
您可能感兴趣的试卷
你可能感兴趣的试题
A.It enables provider edge (PE) specific checks on a router when the OSPF process is associated with the VRF
B.It disables provider edge (PE) specific checks on a router when the OSPF process is associated with the VRF
C.It enables the exchange of the "VRF-Lite" capability when the OSPF adjacency is formed.
D.It disables the MPLS processing on the OSPF learned routes inside the VRF
A.OSPF external LSAs are automatically flooded into all OSPF areas, unlike type 7 LSAs, which require that redistribution be configured.
B.External LSAs (type 5) are automatically changed to type 1 LSAs at ASBRs.
C.Type 5 LSAs are route summaries describing routes to networks outside the OSPF Autonomous System.
D.External network LSAs (type 5) redistributed from other routing protocols into OSPF are not permitted to flood into a stub area
A.Before sending traffic, it must first join multicast group 239.1.1.1 by sending an IGMPv2 membership report to the default router on the local subnet.
B.It must send an IGMPv2 Request to Send packet and then wait for an IGMPv2 Clear to Send packet from the IGMPv2 querier router on the local subnet
C.It may begin transmitting multicast traffic to the group only when there is no other host transmitting to the group on the local subnet.
D.It may transmit multicast traffic to the group at any time.
A.00000
B.12345
C.23456
D.65000
E.99999
A.a root port being transitioned to the blocking state
B.a port being assigned as a root port
C.a port being assigned as an alternate port
D.a root port being transitioned to the forwarding state
A.root port,designated port,alternate port,backup port,and disabled
B.standby port,alternate port,root port,and disabled
C.standby port,designated port,backup port,and disabled
D.root port,designated port,alternate port,and standby port
A.root port
B.backup port
C.designated port
D.alternate port
A.For each such address and mask /32, one label binding is created.
B.As the TCP endpoint, IP addresses are used by the LDP session.
C.These addresses are used to find the label binding to put in the LFIB, by looking up these IP addresses in the routing table.
D.These addresses are used for penultimate hop popping (PHP) when forwarding packets to the next router directly.
A.highest-numbered IP interface
B.MAC address
C.device uptime
D.root port cost
A.CIR=TC/Bc
B.CIR=Be/Tc
C.Tc=CIR/Bc
D.Tc=Bc/CIR
最新试题
Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()
Which router is doing LSA type 7 to type 5 translation,and why?()
What does a unicast prefix-based IPv6 multicast address start with?()
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message (knowing that the MSDP router is also configured as an RP for the PIM domain)?()
Which QoS mechanism can help classify different kinds of Citrix traffic (print job versus real-time terminal control)?()
For the following ports, which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge?()
An administrator of a peer-to-peer server application reports that the maximum bandwidth that his application receives is 90 Mb/s. You have an 8-port,100-Mb/s EtherChannel bundle on the switching infrastructure between the two servers, resulting in a bidirectional throughput of more than what is recorded. Which two solutions would allow for more bandwidth for the application?()
Which three statements are true about policing? ()
Policy-based routing allows network administrators to implement routing policies to allow or deny paths based on all of these factors except which one?()
Which two attributes need to match for two switches to become members of the same MST region? ()