A.Out-of-profile packets are queued.
B.It causes TCP retransmits.
C.Marking and remarking are not supported.
D.It does not respond to BECN and foresight messages.
E.It uses a single- and two-bucket mechanism for metering.
您可能感兴趣的试卷
你可能感兴趣的试题
A.change the EtherChannel default hashing algorithm from XOR to use source port Layer 4 port load balancing to better load balance the traffic
B.change the EtherChannel default hashing algorithm from XOR to use destination Layer 4 port load balancing to better load balance the traffic
C.have the application recoded to use multiple connections instead of a single connection so EtherChannel can better load balance the traffic
D.upgrade the CPU and memory of the compute devices so they can better process traffic
E.upgrade the EtherChannel bundle to a single gigabit link because EtherChannel is not well suited for single-connection traffic
A.the table of 4096 elements that map the respective VLAN to STP instance number
B.VTP version
C.configuration revision number
D.native VLAN ID
A.PIM sparse mode is being used.
B.PIM dense mode is being used.
C.The BGP multicast address family has not been configured.
D.IGMP version 3 is being used.
E.IP PIM neighbor filters have not been applied.
A.The phones are not sending traffic with the correct DSCP value.
B.The Cisco CallManager is not marking the traffic correctly.
C.This is most likely a bug on the CE routers.
D.Your LAN QoS is incorrectly configured.
A.routing issue
B.denial-of-service attack
C.MAC flooding
D.spanning-tree recalculation
E.Layer 2 loop
F.ARP spoofing attack
A.LDAP
B.ICMP
C.RTP
D.BGP
E.SSH
F.RDP
A.qos-group
B.DSCP
C.LFI
D.NBAR
A.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
B.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
C.A sham-link is a logical link between PE routers that carries OSPF LSAs and forwards customer traffic across it.
D.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
E.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
A.Both RTA and RTB will do LSA7/5 translation，since they are both NSSA ABRs
B.RTA will do LSA7/5 translation，since it has the lower router ID
C.RTB will do LSA7/5 translation，since it has the higher router ID
D.The redistributing router will do LSA7/5 translation，since it is within the NSSA
A.It enables provider edge （PE） specific checks on a router when the OSPF process is associated with the VRF
B.It disables provider edge （PE） specific checks on a router when the OSPF process is associated with the VRF
C.It enables the exchange of the "VRF-Lite" capability when the OSPF adjacency is formed.
D.It disables the MPLS processing on the OSPF learned routes inside the VRF
最新试题
In which way can the IPv6 address of 2031：0000：130F：0000：0000：09C0：876A：130B be expressed most efficiently？（）
What does the OSPF command capability vrf-lite achieve？（）
Which statement best describes OSPF external LSAs （type 5）？（）
Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）
In GLBP， which router will answer on client ARP requests？（）
Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router？（）
Which switch port error is an indication of duplex mismatches on 10/100/1000 IEEE 802.3u Gigabit Ethernet ports？（）
Which one of the following potential issues is eliminated by using split horizon？（）
For the following ports， which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge？（）
Which three are needed to run VRF lite for IPv6 on a router？ （）