A.Traffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload.
B.R2 will continue to forward traffic to R1, but R1 will drop the traffic because its neighbor adjacency with R2 has failed.
C.R2 will continue forwarding traffic to and through R1, but R1 will drop this traffic because it is not capable of maintaining its forwarding state.
D.All the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.
您可能感兴趣的试卷
你可能感兴趣的试题
A.It ensures that BPDUs sent by the root bridge are forwarded in a timely manner
B.It enforces the root bridge placement in the network
C.It ensures that all ports receiving BPDUs from the root bridge are in the forwarding state.
D.It ensures that the bridge is elected as root bridge in the network.
A.IPv6 multicast uses Multicast Listener Discovery.
B.The first 8 bits of an IPv6 multicast address are always FF (1111 1111).
C.IPv6 multicast requires MSDP.
D.PIM dense mode is not part of IPv6 multicast.
A.Sent by the destination
B.Received by the sender
C.Received by the destination
D.Sent by the sender
A.Only UplinkFast and BackboneFast are specified in 802.1w; PortFast must be manually configured.
B.Only PortFast is specified in 802.1w; UplinkFast and BackboneFast must be manually configured.
C.None of the proprietary Cisco enhancements are specified in 802.1w.
D.PortFast, UplinkFast, and BackboneFast are specified in 802.1w.
A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch
A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering, with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001:DB8::1
D.2001:DB8:ABCD:FEEF::1
最新试题
Which statement is correct about an OSPF sham-link?()
What does a unicast prefix-based IPv6 multicast address start with?()
Which statement best describes OSPF external LSAs (type 5)?()
Which router is doing LSA type 7 to type 5 translation,and why?()
Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1?()
Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()
For the following protocols, which one provides a mechanism to transparently intercept and redirect CIFS traffic from a client to a local Cisco Wida Area Application engine?()
What does the OSPF command capability vrf-lite achieve?()
In which way can the IPv6 address of 2031:0000:130F:0000:0000:09C0:876A:130B be expressed most efficiently?()
Which two attributes need to match for two switches to become members of the same MST region? ()