A.Only UplinkFast and BackboneFast are specified in 802.1w； PortFast must be manually configured.
B.Only PortFast is specified in 802.1w； UplinkFast and BackboneFast must be manually configured.
C.None of the proprietary Cisco enhancements are specified in 802.1w.
D.PortFast， UplinkFast， and BackboneFast are specified in 802.1w.
您可能感兴趣的试卷
你可能感兴趣的试题
A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch
A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering， with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001：DB8：：1
D.2001：DB8：ABCD：FEEF：：1
A.excessive collisions
B.FCS errors
C.runts
D.late collisions
A.BPDUs that enter a blocking port are discarded.
B.BPDUs that enter a blocking port are processed.
C.Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
D.BPDUs are only processed on forwarding ports.
A.The CBWFQ scheduler provides a guaranteed minimum amount of bandwidth to each class.
B.CBWFQ services each class queue using a strict priority scheduler.
C.The class-default queue only supports WFQ.
D.Inside a class queue， processing is always FIFO， except for the class-default queue.
A.It is a function used by routing protocols to install routes into routing table
B.It is a function that prevents the advertising of routes over an interface that the router is usingto reach a route
C.Its function is to help avoid routing loops.
D.It is a redistribution technique used by routing protocols
最新试题
Policy-based routing allows network administrators to implement routing policies to allow or deny paths based on all of these factors except which one？（）
Which router is doing LSA type 7 to type 5 translation，and why？（）
When a BGP router is not capable of understanding 4-byte AS numbers， it will see 4-byte AS numbers as a special， reserved， 2-byte AS number in the AS path. Which 2-byte AS number is this reserved one？（）
Which three statements are true about policing？ （）
Which statement best describes OSPF external LSAs （type 5）？（）
Which QoS mechanism can help classify different kinds of Citrix traffic （print job versus real-time terminal control）？（）
Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1？（）
For the following items，what is the mathematical relationship between the committed information rate （CIR）， committed burst （Bc）， and committed rate measurement interval （Tc）？（）
Which one of the following potential issues is eliminated by using split horizon？（）
What does the OSPF command capability vrf-lite achieve？（）