A.Sent by the destination
B.Received by the sender
C.Received by the destination
D.Sent by the sender
您可能感兴趣的试卷
你可能感兴趣的试题
A.Only UplinkFast and BackboneFast are specified in 802.1w; PortFast must be manually configured.
B.Only PortFast is specified in 802.1w; UplinkFast and BackboneFast must be manually configured.
C.None of the proprietary Cisco enhancements are specified in 802.1w.
D.PortFast, UplinkFast, and BackboneFast are specified in 802.1w.
A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch
A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering, with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001:DB8::1
D.2001:DB8:ABCD:FEEF::1
A.excessive collisions
B.FCS errors
C.runts
D.late collisions
A.BPDUs that enter a blocking port are discarded.
B.BPDUs that enter a blocking port are processed.
C.Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
D.BPDUs are only processed on forwarding ports.
A.The CBWFQ scheduler provides a guaranteed minimum amount of bandwidth to each class.
B.CBWFQ services each class queue using a strict priority scheduler.
C.The class-default queue only supports WFQ.
D.Inside a class queue, processing is always FIFO, except for the class-default queue.
最新试题
An administrator of a peer-to-peer server application reports that the maximum bandwidth that his application receives is 90 Mb/s. You have an 8-port,100-Mb/s EtherChannel bundle on the switching infrastructure between the two servers, resulting in a bidirectional throughput of more than what is recorded. Which two solutions would allow for more bandwidth for the application?()
You are the network administrator of a Layer 3 switched network. Users in one VLAN are complaining that access to the server VLAN is very slow from time to time. Traffic in the local VLAN works without any issue, and users in other VLANs do not have any complaint to reach the server VLAN. What is most likely the cause of this issue?()
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message (knowing that the MSDP router is also configured as an RP for the PIM domain)?()
For the following ports, which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge?()
Which QoS mechanism can help classify different kinds of Citrix traffic (print job versus real-time terminal control)?()
Which one of the following potential issues is eliminated by using split horizon?()
IEEE 802.1w is a Rapid Spanning Tree Protocol (RSTP) that can be seen as an evolution of the 802.1 standard. What are the port roles described by 802.1w?()
Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router?()
In GLBP, which router will answer on client ARP requests?()
Which three are needed to run VRF lite for IPv6 on a router? ()