A. enable cdp
B. cdp enable
C. cdp run
D. run cdp
您可能感兴趣的试卷
你可能感兴趣的试题
A. ip route 172.16.1.0 255.255.255.0 0.0.0.0
B. ip route 172.16.1.0 255.255.255.0 172.16.2.1
C. ip route 0.0.0.0 255.255.255.0 172.16.2.1
D. ip route 0.0.0.0 0.0.0.0 172.16.2.1
A. NVRAM
B. RAM
C. FLASH
D. ROM
E. PCMCIA
A. copy running-config: TFTP:
B. copy TFTP: running-config
C. copy TFTP: startup-config
D. copy startup-config: TFTP:
A. copy running-config startup-config
B. copy startup-config: running-config
C. copy running config startup config
D. copy startup config running config
E. write terminal
A.10.1.1.1
B.127.0.0.1
C.192.168.0.1
D.239.1.1.1
A. The command establishes a static route
B. The command invokes a dynamic routing protocol for 192.168.12.0
C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1
D. Traffic for all networks is forwarded to 172.16.12.1
E. This route is automatically propagated throughout the entire network
F. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network
A. It provides dynamic neighbor discovery
B. It detects unreachable neighbors in 90 second intervals
C. It maintains neighbor relationships
D. It negotiates correctness parameters between neighboring interfaces
E. It uses timers to elect the router witch the fastest links as the designated router
F. It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF
A.addresseschosenbyacompanytocommunicatewiththeInternet
B.addressesthatcannotberoutedthroughthepublicInternet
C.addressesthatcanberoutedthroughthepublicInternet
D.aschemetoconservepublicaddresses
E.addresseslicensedtoenterprisesorISPsbyanInternetregistryorganization
A. When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B. Each broadcast domain on a switch can have its own unique VTP domain
C. VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
D. When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
E. VTP pruning is used to increase available bandwidth in trunk links
F. Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords
A. show interfaces interface
B. show vlan bri
C. show interfaces interface switchport
D. show interface interface trunk
E. show interfaces vlan
最新试题
What is the subnetwork address for a host with the IP address 201.100.5.68/28?（）
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?（）
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）
If all OSPF routers in a single area are configured with the same priority value,what value dose a router use for the ODPF router ID in the absence of a loopback interface?（）
An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?（）
Which statement is true, as relates to classful or classless routing?（）
How are VTP advertisements delivered to switches across the network?（）
When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?（）
What is the default administrative distance of OSPF?（）
A network administrator needs to configure a serial link between the main office and a remote location.The router at the remote office is a non-cisco router. How should the network administrator configure the serial interface of the main office router to make the connection?（）