A. NVRAM
B. RAM
C. FLASH
D. ROM
E. PCMCIA
您可能感兴趣的试卷
你可能感兴趣的试题
A. copy running-config: TFTP:
B. copy TFTP: running-config
C. copy TFTP: startup-config
D. copy startup-config: TFTP:
A. copy running-config startup-config
B. copy startup-config: running-config
C. copy running config startup config
D. copy startup config running config
E. write terminal
A.10.1.1.1
B.127.0.0.1
C.192.168.0.1
D.239.1.1.1
A. The command establishes a static route
B. The command invokes a dynamic routing protocol for 192.168.12.0
C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1
D. Traffic for all networks is forwarded to 172.16.12.1
E. This route is automatically propagated throughout the entire network
F. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network
A. It provides dynamic neighbor discovery
B. It detects unreachable neighbors in 90 second intervals
C. It maintains neighbor relationships
D. It negotiates correctness parameters between neighboring interfaces
E. It uses timers to elect the router witch the fastest links as the designated router
F. It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF
A.addresseschosenbyacompanytocommunicatewiththeInternet
B.addressesthatcannotberoutedthroughthepublicInternet
C.addressesthatcanberoutedthroughthepublicInternet
D.aschemetoconservepublicaddresses
E.addresseslicensedtoenterprisesorISPsbyanInternetregistryorganization
A. When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B. Each broadcast domain on a switch can have its own unique VTP domain
C. VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
D. When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
E. VTP pruning is used to increase available bandwidth in trunk links
F. Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords
A. show interfaces interface
B. show vlan bri
C. show interfaces interface switchport
D. show interface interface trunk
E. show interfaces vlan
A. any-to-many communication model
B. delivery of packets to the group interface that is closest to the sending device
C. one-to-many communication model
D. the same address for multiple devices in the group
E. one-to-nearest communication model
F. a unique IPV6 address for each device in the group
A.HMAC-MD5
B.RSA
C.HMAC-SHA-1
D.DH1
E.DH2
最新试题
While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?()
Which statement describes the rule of split horizon?()
You have been asked to come up with a subnet mask that will allow all three web servers to be on the same network while providing the max number of subnets.Which network address and subnet mask meet this requirement?()
Which statement is true, as relates to classful or classless routing?()
What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?()
After the show ip route command has been entered,the follwing routes are displayed.Which route will not be entered into the routing table of a neighboring router?()
At which layer of the OSI model dose PPP perform?()
Which device might be installed at a branch office to enable and manage an IPsec site-to-site VPN?()
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?()
Which IPsec security protocol should be used when confidentiality is required?()