A. Lower-priority traffic is assigned short interframe wait-timers to allow higher-priority traffic access to the wireless network first.
B. Packets that are not assigned to a specific access category are categorized by default as the background access category.
C. The WMM standard was implemented after the 802.11e standard was approved to provide support for non 802.11e devices.
D. WMM is a Wi-Fi Alliance standard that was implemented before the 802.11e standard was approved.
E. WMM uses Enhanced DCF （EDCF） to stipulate fixed and random wait times for the different access classes.
您可能感兴趣的试卷
你可能感兴趣的试题
A. gold， silver， bronze， and platinum
B. platinum， gold， silver， and bronze
C. titanium， gold， silver， and bronze
D. voice and video， best effort， background， and scavenger
E. voice， video， best effort， and background
F. voice， video， best effort， and scavenger
A. Enter the clear controller command followed by the reload command.
B. Enter the clear controller command followed by the reset command.
C. Enter the clear controller command followed by the reset system command.
D. Enter the erase startup-config command followed by the reload command.
E. Enter the erase startup-config command followed by the reset command.
F. Enter the erase startup-config command followed by the reset system command.
A. Home， Configure， Location， and Monitor
B. Home， Configure， Monitor， and Refresh
C. Home， Monitor， Refresh， and Administration
D. Monitor， Configure， Location， and Administration
E. Monitor， Configure， Refresh， and Administration
F. Monitor， Location， Refresh， and Administration
A. Traffic to be policed is identified using the control-plane global configuration command.
B. The control-plane global configuration command enters the Cisco Modular QoS CLI （MQC） mode.
C. The control-plane global configuration command enters the control-plane configuration mode.
D. Traffic to be policed is identified using the control-plane interface configuration command.
E. The control-plane interface configuration command enters the Cisco Modular QoS CLI （MQC） mode.
F. The control-plane interface configuration command enters the control-plane configuration mode.
A. Type 1
B. Type 2
C. FXS
D. FXO
E. E&M
A. On congested links， all forms of traffic will require some form of QoS.
B. All traffic types and requirements should be examined to determine the number of traffic classes required.
C. In the implementation of link efficiency mechanisms on links that typically transport relatively large packets， header compression will be most efficient.
D. In the implementation of link efficiency mechanisms on links that typically transport relatively small packets， header compression will be most efficient.
E. In the implementation of link efficiency mechanisms on links that typically transport relatively small packets， payload compression will be most efficient.
F. Payload compression provides more available bandwidth and reduces processing delay time.
A. Because services are allocated throughout the network before the transmission of data begins， traffic classes can be guaranteed QoS services.
B. Traffic classes are marked with Layer 2 markings to allow for more granularity in identifying traffic classes.
C. Traffic classes are marked with Layer 3 markings to allow them to traverse different network types without loss of QoS information.
D. Traffic classes allow networks to provide proper QoS treatment of packets without applications having to request services.
E. Based upon the network capabilities， QoS markings are placed on packets as needed throughout the network to allow for proper QoS treatment of packets.
F. QoS markings are placed on packets as close to the network edge as possible to allow distribution and core devices to determine QoS actions as quickly as possible.
A. ISR can perform the functions of a multipoint control unit to facilitate voice conferencing.
B. ISR can perform the function of a call agent in the event of loss of communication with a CallManager.
C. ISR can provide XML applications to the phones.
D. ISR can provide all of the functionality of a CallManager in the event of loss ofcommunication to the CallManager.
E. ISR can act as a voice gateway to the PSTN.
A. Channel-associated signaling transmits control signals in band and therefore reduces the bandwidth available for the voice data stream.
B. Channel-associated signaling utilizes a separate TDM channel for transmitting control signals.
C. Common channel signaling transmits control signals in band and therefore reduces the bandwidth available for the voice data stream.
D. Common channel signaling uses one of the TDM channels to transmit control information reducing the number of channels available for voice.
E. ISDN BRIs implement channel-associated signaling.
A. Analog phones， connected to the PSTN， act as internal call agents if IP communication to the CallManager is lost.
B. An onsite gateway reroutes calls over the PSTN if IP communication to the CallManager is lost.
C. The IP phones can reroute calls over the PSTN if IP communication to the CallManager is lost.
D. Local voice gateways can assume the function of a call agent if IP communication to the CallManager is lost.
E. IP phones use an internal call agent if IP communication to the CallManager is lost.
最新试题
Which three benefits are realized by implementing Wireless LAN Solution Engine （WLSE）？（）
Which statement is true about the Call Admission Control （CAC） feature in VoIP networks？（）
Which two functions can be provided by an Integrated Services Router （ISR） in a VoIP network？（）
Which two statements are true about Voice over IP （VoIP） packet delivery in a digital infrastructure？ （）
Which three practices are important to the implementation of a DiffServ QoS architecture？（）
Which two commands should be entered on a WLAN controller to remove any residual configuration？（）
What are three factors used to determine the amount of bandwidth that is required for a single VoIP call？ （）
When QoS levels in the Cisco Wireless Control System （WCS） are entered， which profile names are used to identify the access categories？（）
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）
Within the WMM policy， how many default QoS radio access categories are there？（）