You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method.
When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?()
A. Switch(config)# switchport trunk encapsulation isl
B. Switch(config)# switchport trunk encapsulation ietf
C. Switch(config-if)# switchport trunk encapsulation isl
D. Switch(config-if)# switchport trunk encapsulation ietf
E. Switch(config-if)# switchport trunk encapsulation dot1q
您可能感兴趣的试卷
你可能感兴趣的试题
A. Create the VLAN.
B. Name the VLAN.
C. Configure an IP address for the VLAN.
D. Add the desired ports to the new VLAN.
E. Add the VLAN to the VTP domain.
A. TestKingD# disconnect 3
B. TestKingD# exit session 2
C. TestKingD# kill connection 1
D. TestKingD# show sessions
E. TestKingD# show connection all
F. TestKingD# resume 4
You wish to limit telnet access into your Cisco router to only a single host. In order to accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines.
What command would assign this access- list to the Virtual Terminal Lines?()
A. router(config-line)# ip access-group 1 in
B. router(config-line)# access-class 1 in
C. router(config-line)# ip access-list 1 in
D. router(config-line)# access-line 1 in
A. Administratively shut down the interface.
B. Physically secure the interface.
C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.
D. Configure a virtual terminal password and login process.
E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.
A. Bandwidth 56000
B. Bandwidth 56000000
C. Bandwidth 56
D. Bandwidth 56kbps
A. Switch(config)# ip default-network 192.168.12.1
B. Switch(config)#ip route-default 192.168.12.1
C. Switch(config)# ip default-gateway 192.168.12.1
D. Swicth(config)# ip route 192.168.12.1 0.0.0.0
A. TestKingA(config-if)# ip address 192.168.32.142 255.255.255.240
B. TestKingA(config-if)# ip address 192.168.32.143 255.255.255.240
C. TestKingA(config-if)# ip address 192.168.32.158 255.255.255.240
D. TestKingA(config-if)# ip address 192.168.32.145 255.255.255.240
E. TestKingA(config-if)# ip address 192.168.32.144 255.255.255.240
A. 113.10.4.0
B. 186.54.3.0
C. 175.33.3.255
D. 26.35.3.255
E. 152.135.7.0
F. 17.35.36.0
A. router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0
B. router(config-if)#142.8.2.1 0.0.3.255
C. router(config-if)#ip address 142.8.2.1 255.255.252.0
D. router(config-if)#142.8.2.1 subnet mask 255.255.252.0
E. router(config-if)#ip address 142.8.2.1 0.0.3.255
F. router(config-if)#ip address 142.8.2.1 subnet mask /22
A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36
B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255
C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255
D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0
E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0
F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36
最新试题
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? ()
Which characteristics are representative of a link-state routing protocol?()
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? ()
What does a configuration Register Setting of 0x2105 indicate to the Router? ()
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? ()
Which connections allow the use of full-duplex Ethernet?()
Which of the following statements regarding routed and routing protocols are true?()
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?()
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?()
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?()