A client roams from h-reap ap1 to h-reap ap2. the client is unable to associate to h-reap ap2. h-reap ap2 has six other clients associated to it， which continue to pass traffic.
What has caused this problem？（）
A.h-reap ap1 has reached its client limit.
B.h-reap ap2 has reached its client limit.
C.h-reap ap2 lost its connection to the controller.
D.h-reap ap1 lost its connection to the controller.
您可能感兴趣的试卷
你可能感兴趣的试题
You are trying to change the polling parameters used by the location manager via the cisco wcs， and your request is being denied.
What is wrong？（）
A.polling values can be changed only in the maintenance window.
B.polling values can be changed only on the location server.
C.your login does not have the correct permissions.
D.you must wait for the location server to become available.
A.system monitoring
B.security administration
C.operations setup
D.problem management
On a cisco 1000 series controller-based access point，the alarm led is flashing red，but the other leds are off.
What is this access point indicating？（）
A.its ip address already exists.
B.it is operating normally.
C.it requires a code upgrade.
D.it has lost contact with the controller.
A.admin
B.users assistant
C.system monitoring
D.power users
E.administrators
F.network operator
Clients using cisco-leap and eap-fast authentication are having no problems logging on to The wireless network， but clients using peap are failing to log on.
Which situation would result in this type of problem？（）
A.posture validation has not been enabled.
B.the aaa server is set to accept both ms-chap v2 and gtc for peap authentication.
C.clients and server are not using certificates.
D.clients have been set to validate the server identity.
A.3
B.6
C.4
D.1
A.create a more effective sales strategy for partners.
B.reinforce customer confidence in partners selling products.
C.provide a consistent， repeatable， and proven method to ensure the network solution that is deployed delivers upon the customer’s goals for reliability and availability.
D.maximize the number of services required to support advanced technologies.
E.more clearly define the roles of account managers， systems engineers， and field engineers.
A.project kickoff，staging，systems acceptance testing，ongoing support handoff meeting
B.wlan change management，security administration，technology assessment，operations plan
C.security assessment，operations assessment，supplier management
D.operations readiness assessment，systems requirements validation，planning project kickoff，service assurance
On a cisco aironet 802.11 a/b/g wireless lan client adapter， the status led and activity led are alternating on and off.
What does this indicate？（）
A.the client card is not associated to the network.
B.the client card has awakened from power-save mode.
C.the driver has been installed incorrectly.
D.the client card has failed.
You have very few cisco 7920 wireless ip phones on your network， but lots of wireless laptops. You want to increase the bandwidth available for the laptops by decreasing the bandwidth
reserved for the cisco 7920 phones.
What is the lowest percentage of voice-allocated bandwidth you can select on the wlan controller？（）
A.55 percent
B.75 percent
C.40 percent
D.25 percent
最新试题
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
The IOS of a North American Cisco Aironet 1130AG Series standalone access point has becomecorrupt. You must therefore reload the TFTP firmware.Before you press and hold the MODEbutton， you should verify that the file name is which of the following？（）
You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side，which of the following actionsshould you perform on the wired infrastructure？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
Which of the following accurately represents the functionality of a lightweight access point configured to operate in sniffer AP mode？（）
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）