A.Router A must have a Level 2 adjacency with the Level 1/Level 2 router in area 49.0001.
B.The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 2 LSP it floods into area 49.0001.
C.The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 1 link-state PDU (LSP) it floods into area 49.0001.
D.The Level 1/Level 2 router in area 49.0001 advertises these prefixed into area 49.0001 using a Level 2 LSP it floods into the area.
您可能感兴趣的试卷
你可能感兴趣的试题
A.broadcast hellos
B.Level 1 LAN hellos
C.Point-to-point hellos
D.Level 2 point-to-point hellos
A.route filtering
B.protect the routing engine
C.securing the router control plane
D.protect against hidden bridge loops
E.protect against denial of service attacks
A.Source TCP port
B.Source IP address
C.Destination TCP port
D.Destination IP address
A.MPLS
B.Load Balancing
C.Class Based Forwarding
D.Filter Based Forwarding
A.LSA Type 8
B.LSA Type 9
C.LSA Type 10
D.Transparent LSA
A.cspf enable
B.disable no-cspf
C.traffic-engineering
D.enable traffic-engineering-database
Given the community:
communitymy-company members "^[1-3]*7:666$";
Which four communities does this expression match?()
A.17:666
B.17:667
C.27:666
D.37:666
E.47:666
F.777:666
G.117:666
A.IBGP peers
B.EBGP peers
C.Active BGP peers
D.Established BGP peers
A.all BGP peers
B.all IBGP peers
C.all EBGP peers
D.all MBGP peers
Which action occurs when the policy main-policy evaluates the BGP route 10.0.55.2/32?()
[edit policy-options]
policy-statement test {
from {
route-filter10.0.0.016/orlongeraccept;
route-filter10.0.67.0/24orlangerreject;
route-filter10.0.0.0/8orlanger;
}
then {
metric10;
community add no-advertise;
accept;
}
}
policy-statement main-policy {
term only-want-certain-routes {
from {
policytest;
}
then {
communityadd harry-402;
accept;
}
}
}
communityno advertise members no-advertise;
communityharry-402 members 666:402;
[edit protocols]
bgp {
exportmain-policy; }
A.The route is not advertised into BGP
B.The route is advertised into BGP with community harry-402.
C.The route is advertised into BGP with community no-advertise.
D.The route is advertised into BGP with community harry-402 and no-advertise.
最新试题
Which method of dynamic RP election is non-proprietary?()
In which two ways can the router ID selection be controlled?()
Given the topology displayed in the exhibit. All links have an OSPF metric of 10.The link between Router A and Router B is in area 0.0.0.0. All other links are in area 0.0.0.1.What does Router A do with packets destined for Network Z?()
What is a function of the OSPF Type 7 LSA?()
Which three authentication options does OSPF support?()
In JUNOS software, which type of encapsulation is required on a PE router for the CE-facing interface in a Martini-based VPN?()
Routers A and B are connected with a point-to-point OC-3 interface. Each router’s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas.How many IS-IS adjacencies exist between the two routers?()
In IS-IS, how does the restarting router inform its helpers that a restarts event occurred?()
You have a Level 1-only router (Router A) in IS-IS area 49.0001. How does Router A learn how to get to IP prefixed in other areas?()
In JUNOS software, which three routing protocols can be used to route IPv6?()