A.It describes the reachability of routes in stub areas.
B.It describes the reachability of routes in totally-stubby areas.
C.It describes the reachability of routes in not-so-stubby areas.
D.It describes the reachability of routes in partially-stubby areas.
您可能感兴趣的试卷
你可能感兴趣的试题
A.MD5
B.DES
C.Kerberos
D.Unauthenticated
E.Simple password
A.AF
B.AFI
C.MAC
D.Area
E.SysID
F.A-Selector
G.N-Selector
H.IP-address
A.Sending out a graceful restart PDU
B.Sending an LSP that contains no TLVs.
C.Sending out a restarts TLV with the RR bit set.
D.Reflooding its LSP with a maximum sequence number.
A.Router A must have a Level 2 adjacency with the Level 1/Level 2 router in area 49.0001.
B.The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 2 LSP it floods into area 49.0001.
C.The Level 1/Level 2 router in area 49.0001 sets the "attached" bit in the Level 1 link-state PDU (LSP) it floods into area 49.0001.
D.The Level 1/Level 2 router in area 49.0001 advertises these prefixed into area 49.0001 using a Level 2 LSP it floods into the area.
A.broadcast hellos
B.Level 1 LAN hellos
C.Point-to-point hellos
D.Level 2 point-to-point hellos
A.route filtering
B.protect the routing engine
C.securing the router control plane
D.protect against hidden bridge loops
E.protect against denial of service attacks
A.Source TCP port
B.Source IP address
C.Destination TCP port
D.Destination IP address
A.MPLS
B.Load Balancing
C.Class Based Forwarding
D.Filter Based Forwarding
A.LSA Type 8
B.LSA Type 9
C.LSA Type 10
D.Transparent LSA
最新试题
Which three authentication options does OSPF support?()
Which two statements are true when configuring a domain-id?()
How is the cost of a virtual link in OSFP calculated?()
In JUNOS software, what is the purpose of the eui-64 command?()
You want to limit the number of Type 7 LSAs to be converted into Type 5 LSAs at an appropriate ARB. Which two commands should you use from the [edit] hierarchy level within the JUNOS software configuration mode?()
You have a Level 1-only router (Router A) in IS-IS area 49.0001. How does Router A learn how to get to IP prefixed in other areas?()
Which LSA is used in JUNOS software when a OSPF router restarts?()
Routers A and B are connected with a point-to-point OC-3 interface. Each router’s OC-3 interface is configured for both Level 1 and Level 2. The routers are configured in different areas.How many IS-IS adjacencies exist between the two routers?()
What is a function of the OSPF Type 7 LSA?()
What methods are available to create separate multicast and unicast forwarding topologies on a Juniper Networks router?()