A.正前窗白色玻璃应自垂直平面顶部向外倾斜150
B.正前窗白色玻璃应自垂直平面顶部向内倾斜50
C.正前窗茶色玻璃应自垂直平面顶部向外倾斜100
D.正前窗茶色玻璃应自垂直平面顶部向外倾斜50

A.稳性资料
B.加压载和减压载的速率和能力
C.内底板上单位表面积的最大许用载荷以及每舱最大许用载荷
D.有关船体结构强度的一般装卸须知，包括在装卸货物、压载作业及航行期间的最不利作业状态的任何限制。任何特别的限制，例如主管机关或由其认可的组织所施加的最不利作业状态的限制（如适用）

A.900mm
B.600mm
C.760mm
D.450mm

A.An automatic or manual fixed extinguishing system tested to an appropriate standardacceptable to the Organization
B.Controls for manual operation of the fire-extinguishing system which are clearlylabeled for ready use by the crew
C.Arrangements for automatically shutting off the electrical power upon activation of thefire-extinguishing system
D.an alarm for indicating operation of the fire-extinguishing system in the galley wherethe equipment is installed

A.The location and extent of application of different grades and strengths of materials
B.The approved and available welding procedure adopted in the construction
C.Restrictions or prohibitions of repairing or modification
D.None of them

A.泵舱应设有双层底且泵舱底和基线之间距离h不小于h/15（m）或h=2m，取小者
B.如果泵舱的底板高出基线至少达所要求的最小高度，则泵舱处不需要双层底构造
C.压载水泵应予合适布置，确保有效地从双层底舱中抽水
D.无任何要求，不必设置双层底

A.The location and extent of application of different grades and strengths of materials.
B.The approved and available welding procedure adopted in the construction
C.Restrictions or prohibitions of repairing or modification
D.None of them

A.应急部署表（Musterlists）
B.油污应急计划（SOPEP）
C.GMDSS设备操作说明书
D.破损控制图（DamageControlPlan）

A.手电筒照射
B.粉笔痕迹
C.100mm检查线
D.锤子敲击

A.起重设备的金属构件和固定零部件的最大耗蚀超过原尺寸10%
B.活动零部件的耳环、链条环、环栓、拉板和吊钩等最大耗蚀超过原尺寸10%，销轴的最大耗蚀超过原直径6%
C.钢索有过度磨损，严重腐蚀或钢索在10倍直径长度内有5%钢丝折断者
D.以上都是