A.ciscoaironet 1400 series B.ciscoaironet 1300 series C.ciscoaironet 1100 series D.ciscoaironet 1240ag series
A.Yes，by modifying the LWAPP frame header DSCP value in transit. B.Yes，by modifying the LWAPP frame header 802.1p value in transit. C.No，the WMM queue classification parameter is transported inside the LWAPP tunnel. D.No，the WMM queue classification parameter is determined at the AP based on the original client IP header DSCP value.
A.Clients connected to the rogue access point must be able to connect to the containmentcontroller-based access point. B.Multiple controller-based access points will load-balance the containment task using fewerresourcesthan a single access point. C.Clients connected to the rogue access point may be out of the range of the controller-basedaccess point providing containment. D.Each controller-based access point can handle only a limited amount of clients connected tothe rogue access points.
A.Echo is the discernable leak-through of your own Rx path into your own Tx path. B.Echo is the discernable leak-through of the packets of your Rx path into your own Tx path. C.Echo is the nonaudible leak-through of the packets of your Rx path into your own Tx path. D.Echo is the audible leak-through of the packets from the transmit path into your own receive path. E.Echo is the nonaudible leak-through of the packets of your Tx path into your own Rx path.
A. SDH circuit over a SONET network delivering it as an SDH signal B. SDH circuit over a SONET network delivering it as a SONET signal C. SONET circuit over an SDH network delivering it as an SDH signal D. SONET circuit over an SDH network delivering it as a SONET signal
A.work staff attributes， such as skills and communication B.redundancy， to prevent single points of failure C.processes， such as documentation， change control， and labs D.appropriate technology， such as hardware and software E.tools， such as those for monitoring and reporting
A.cloning B.CMCs C.IOMs D.Templates
A. Prepare, Plan, Create, Implement, Operate, and Improve B. Prepare, Plan, Design, Implement, Operate, and Optimize C. Prepare, Plan, Design, Apply, Operate, and Manage D. Prepare, Plan, Design, Implement, Operate and Manage
A.OSPF must be configured with the same MD5 authentication B.BGP authentication can be used on iBGP peers when the connection is configured between theloopback interfaces C.BGP authentication can be used on eBGP peers only D.The password that is used for BGP authentication on both BGP peers in autonomous system65200 must be the same
A. dispersion B. Optical SNR C. span attenuation D. four wave mixing E. receiver sensitivity
微信扫一扫关注公众号后联系客服
微信扫码免费搜题
