A.ciscoaironet 1400 series
B.ciscoaironet 1300 series
C.ciscoaironet 1100 series
D.ciscoaironet 1240ag series
您可能感兴趣的试卷
你可能感兴趣的试题
On a cisco aironet 1130ag series standalone access point,the status led is dark blue and blinking.
What does this indicate?()
A.the internal radio has failed.
B.a firmware upgrade is in progress.
C.an access point buffer overflow is occurring.
D.the access point is booting.
In a deployment using standalone access points, clients set up to authenticate with eap-peap or eap-cisco wireless (cisco-leap) cannot authenticatE. when you inspect the failed attempts report on the cisco secure acs, you find this error: "unknown network access server nas."
Which problem may have caused this failure?()
A.misconfigured ip address of the aaa server on the access point
B.misconfigured eap type on the access point
C.misconfigured ip address of the access point on the aaa server
D.misconfigured eap type on the aaa server
A.router (config-ssid)# guest-mode
B.router (config-ssid)# advertise
C.router (config-ssid)# enable
D.router (config-ssid)# broadcast
Yours truly,customer has deployed a cisco wireless location appliance within its warehouse
environment. however, employees there have been experiencing problems when tracking objects using active rfid tags. the rfid tag data is not being collected.
On which device would you verify that rfids have been enabled?()
A.access point
B.location manager
C.wireless controller
D.cisco wcs
A.partners having a discussion with customers about the minimum service components needed to successfully deploy a wireless solution
B.customers determining a competitor’s strategy for adopting advanced technologies
C.partners choosing the right products for their customers
D.customers choosing the right products for their network
E.customers defining the correct strategy for advanced technology adoption
A.five
B.three
C.six
D.four
A.cisco-leap,eap-fast,eap-peap(gtc),eap-tls
B.cisco-leap,eap-psk,eap-peap(ms-chap v2),eap-tls
C.cisco-leap,eap-fast,eap-peap(ms-chap v2),eap-ttls
D.cisco-leap,eap-md5,eap-peap(gtc),eap-ttls
You are using standalone cisco aironet 1400 series wireless bridges for a nine-mile point-to-point wireless link between two buildings.
Which distance setting should you use for the bridge configured as the root?()
A.20 km [12.4 miles]
B.10 km [6.2 miles]
C.5 km [3.1 miles]
D.25 km [15.5 miles]
E.15 km [9.3 miles]
When configuring a cisco 3845 integrated services router to support 802.11b and g clients.
Which of the following commands would be correct?()
A.router(config-if)# speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
B.router(config-if)# speed 1.0 2.0 5.5 6.0 9.0 basic-11.0 12.0 basic-18.0 24.0 36.0 48.0 54.0
C.router(config-if)# speed basic-1.0 2.0 5.5 basic-6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
D.router(config-if)# speed 1.0 2.0 5.5 basic-6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0
A.enable concatenation on the non-root bridge only
B.enable concatenation on the root bridge only
C.enable concatenation on both the root bridge and non-root bridge
D.enable concatenation on the root bridge and set it as desirable on the non-root bridge
E.set concatenation as desirable on the root bridge and enable it on the non-root bridge
最新试题
You are configuring a wireless LAN controller for QoS.Which 802.11e user priority tag should you apply to voice applications?()
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but, when you answer, the call is dropped.What may cause this problem?()
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add?()
You review the Failed Attempts logs on an AAA server and find: "unknown network access servererror." Which failure could produce this error?()
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it, allthe LEDs on the access point blink together.What does this indicate about the access point?()
You are using ADU and are authenticated and associated to an access point. However, you are unable to obtain an IP address.Which of these has caused this problem?()
A Cisco Wireless Location Appliance has been added to track RFID tags placed on laptops beingused in a school.Classrooms at the school have concrete block walls. During testing,you discoverthat the accuracy of the system needs to be improved.You decide to edit the map in the Cisco WCS to add the interior walls.How many interior walls can you add to improve the accuracy of thelocation appliance?()
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port?()
You are trying to change the polling parameters used by the location manager via the Cisco WCS,and your request is being denied. What is wrong?()
An REAP was supporting 16 WLANs, but now it only supports one.What happened to cause the change?()