单项选择题When a packet is sent from Host 1 to Server 1, in how many different frames will the packet be  encapsulated as it is sent across the internetwork?()

A.0
B.1
C.2
D.3
E.4


您可能感兴趣的试卷

你可能感兴趣的试题

1.单项选择题Users on the 192.168.1.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server?()

A.ip route 0.0.0.0 0.0.0.0 s0/0/0
B.ip route 0.0.0.0 0.0.0.0 209.165.200.226
C.ip route 209.165.200.0 255.255.255.0 192.168.1.250
D.ip route 192.168.1.0 255.255.255.0 209.165.100.250

2.单项选择题Which wireless LAN design ensures that a mobile wireless client will not lose connectivity when moving from one access point to another?()

A.using adapters and access points manufactured by the same company
B.overlapping the wireless cell coverage by at least 10%
C.configuring all access points to use the same channel
D.utilizing MAC address filtering to allow the client MAC address to authenticate with the surrounding APs

3.单项选择题Which encryption type does WPA2 use?()

A.AES-CCMP
B.PPK via IV
C.PSK
D.TKIP/MIC

4.多项选择题Which are valid modes for a switch port used as a VLAN trunk? (Choose three.)()

A.transparent
B.auto
C.on
D.desirable
E.blocking
F.forwarding

5.单项选择题Which statement is true about full-duplex Ethernet in comparison to half-duplex Ethernet?()

A.Full-duplex Ethernet consists of a shared cable segment. Half-duplex Ethernet provides a point-to-point link.
B.Full-duplex Ethernet uses a loopback circuit to detect collisions. Half-duplex Ethernet uses a jam signal.
C.Full-duplex Ethernet can provide higher throughput than can half-duplex Ethernet of the same bandwidth.
D.Full-duplex Ethernet uses two wires to send and receive. Half-duplex Ethernet uses one wire to send and receive.

8.多项选择题Which of the following are types of flow control? (Choose three.)()

A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.load balancing

9.单项选择题Acknowledgements, sequencing, and flow control are characteristics of which OSI layer?()

A.Layer 2
B.Layer 3
C.Layer 4
D.Layer 5
E.Layer 6
F.Layer 7

10.单项选择题When a new trunk link is configured on an IOS based switch, which VLANs are allowed over the link?()

A.By default, all defined VLANs are allowed on the trunk.
B.Each single VLAN, or VLAN range, must be specified with the switchport mode command.
C.Each single VLAN, or VLAN range, must be specified with the vtp domain command.
D.Each single VLAN, or VLAN range, must be specified with the vlan database command.

最新试题

What is the default administrative distance of OSPF?()

题型:单项选择题

You have been asked to come up with a subnet mask that will allow all three web servers to be on the same network while providing the max number of subnets.Which network address and subnet mask meet this requirement?()

题型:单项选择题

How are VTP advertisements delivered to switches across the network?()

题型:单项选择题

At which layer of the OSI model is RSTP used to prevent loops?()

题型:单项选择题

While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?()

题型:单项选择题

The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?()

题型:单项选择题

What is the purpose of the cisco Vlan Trunking protocol?()

题型:单项选择题

Which device might be installed at a branch office to enable and manage an IPsec site-to-site VPN?()

题型:单项选择题

Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?()

题型:单项选择题

Three access ports have been installed and configured to a small office.What term defines the wireless topology?()

题型:单项选择题