A.Increase memory allocation for ACLs.
B.Remove all entries from the ACL and use a single permit ip any any statement.
C.Remove the log keyword from each ACL entry.
D.Reboot the device after the ACL has been applied.
您可能感兴趣的试卷
你可能感兴趣的试题
A.IPSec VPN
B.SSL VPN
C.port security
D.port security with statically configured MAC addresses
E.private VLANs
A.root guard
B.loop guard
C.BPDU guard
D.UDLD
E.BPDU skew detection
A.a routing protocol that is flooding updates
B.a flapping port that is generating BPDUs with the TCN bit set
C.STP is not running on the switch
D.a user that is downloading the output of the show-tech command
E.a corrupted switch CAM table
A.ip verify unicast source reachable-via any
B.ip verify unicast reverse-path
C.ip verify unicast reverse-path loose
D.ip verify unicast reverse-path strict
A.Increase the queue size of the voice class.
B.Guarantee bandwidth during congestion to the voice class with a bandwidth command.
C.Increase the tx-ring of the egress interface.
D.Implement LLQ for the voice class.
E.Decrease the rx-ring of the egress interface.
F.Decrease the queue size of the voice class.
A.It will advertise the prefix to all other client peers and non-client peers.
B.It will not advertise the prefix to EBGP peers.
C.It will only advertise the prefix to all other IBGP peers.
D.It will not advertise the prefix to any peers.
A.Link
B.NSSA external
C.Network link
D.Intra-area prefix
E.AS domain
A.6to4
B.6over4
C.ISATAP
D.6PE
E.GRE
A.Prepend extra AS hops to the BGP prefix.
B.Advertise more specific BGP prefixes（longer mask）.
C.Add（prepend）one or more communities to the prefix that is advertised by BGP.
D.Have BGP dampen the prefix.
A.the entire network switches to 802.1D and generates BPDUs to determine root bridfe status.
B.A migration delay of three seconds occurs when the port that is connected to the 802.1D bridge comes up
C.The entire network reconverges and a unique root briddge for the 802.1D segment， and a root bridge for the 802.1W segment， is chosen
D.the first hop 802.1w switch that is connected to the 802.1D runs entirely in 802.1DCompatibility mode and converts the BPDUs to either 802.1D or 802.1W segments of the network
E.Classic 802.1D timers， Such as forward Delay and Max-age， will only be used as a backup， and will not be necessary if point-to-point links and edge prots are properly identified and set by the administrator.
最新试题
Internet Protocol version 6 （IPv6） is the next-generation Internet Layer protocol for packet-switched internetworks and the Internet. IPv6 router solicitation is（）
In which way can the IPv6 address of 2031：0000：130F：0000：0000：09C0：876A：130B be expressed most efficiently？（）
What is the command to configure RSVP to reserve up to one-tenth of a Gigabit link， but only allow each individual flow to use 1 MB/s？（）
In GLBP， which router will answer on client ARP requests？（）
When a BGP router is not capable of understanding 4-byte AS numbers， it will see 4-byte AS numbers as a special， reserved， 2-byte AS number in the AS path. Which 2-byte AS number is this reserved one？（）
Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）
Which one of the following potential issues is eliminated by using split horizon？（）
Which statement best describes OSPF external LSAs （type 5）？（）
f a Cisco switch is configured with VTPv1 in transparent mode， what is done with received VTP advertisements？（）
Phase I and Phase II DMVPN differ in terms of which of these characteristics？（）