A. The ip classless command is enabled by default in recent versions of IOS.
B. The ip classless command should only be enabled when static routing is being used instead of a routing protocol.
C. The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.
D. The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
您可能感兴趣的试卷
你可能感兴趣的试题
A.1
B.10
C.1562
D.64000
E.128000
A.10.172.13.65
B.172.16.223.125
C.172.64.12.29
D.192.168.23.252
E.198.234.12.95
F.212.193.48.254
A. An IP address is required on the physical interface of the central router.
B. All routers are required to be fully meshed.
C. All routers must be in the same subnet to forward routing updates and broadcasts.
D. Multipoint is the default configuration for Frame Relay subinterfaces.
A. Router(config-line)# access-class 10 in
B. Router(config-if)# ip access-class 23 out
C. Router(config-line)# access-group 15 out
D. Router(config-if)# ip access-group 110 in
E. Router(config-line)# access-list 150 in
F. Router(config-if)# ip access-list 128 out
Which switch is the root bridge for VLAN 1?()
A.Sw-DS1
B.Sw-AC1
C.Sw-AC2
D.Sw-AC3
Out of which port on Sw-Ac3 would a frame containing an IP packet with a destination address that is not on a local LAN be forwarded?()
A.Fa0/1
B.Fa0/3
C.Fa0/4
D.Fa0/8
E.Fa0/9
F.Fa0/12
What interface did Sw-AC3 associate with source MAC address 0010.5a0c.ffba?()
A.Fa0/1
B.Fa0/3
C.Fa0/6
D.Fa0/8
E.Fa0/9
F.Fa0/12
What address should be configured as the default-gateway for the host connected to interface Fa0/4 of Sw-AC3?()
A.192.168.1.254
B.192.168.22.254
C.192.168.33.254
D.192.168.44.254
A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's ethernet port using a straight-through cable.
D. Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
E. Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.
A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0
最新试题
What feature of a networks switch allows an administrative to create separate broadcast domains?()
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?()
TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.()
Which of the following contribute to congestion on an Ethernet network?()
Which of the following options lists the steps in PPP session establishment in the correct order?()
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()
A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?()
Which of the following correctly describe steps in the OSI data encapsulation process?()
Which statement describes the rule of split horizon?()
Which of the following host addresses are member of networks that can be routed across the public Internet? ()