A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR.
Which of the following should be added for the seventh LPAR boot device?（）
A.An additional 7311-D10 drawer
B.An adapter to boot off a SAN device
C.An additional disk to the media bay
D.Two disks to the internal configuration
您可能感兴趣的试卷
你可能感兴趣的试题
A.Create a mksysb backup of the original and restore it to the new partitions
B.Use NIM to load the additional partitions from an image of the original partition
C.Create alt_disk_install clones of the original partition and assign the target disks to the new partitions
D.Use the split mirror function to split off additional copies of the original partition and assign them to the other partitions
Companycom is purchasing a 64-way p5 595. They have determined the location for the server is in a datacenter which does not have a raised floor.
Which of the following would best meet the server requirements?（）
A.The server must be installed into a location with a raised floor for optimum system cooling and cable management.
B.The server should be purchased as a p5 590 and then upgraded to a p5 595. This will eliminate the need for a raised floor environment.
C.The server should be purchased as 32-way p5 595 and then upgraded to a 64-way. This will eliminate the need for a raised floor environment.
D.The server can be installed into a location without a raised floor if an RPQ is obtained. It is a strong IBM recommendation for a raised floor, not a requirement.
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor.
What needs to be done to fix this problem?（）
A.Enable DHCP server on the HMC
B.Configure host name and IP address on DNS server
C.Manually set the IP address of the service processor
D.Connect a RS-232 cable from the HMC to the service processor
Companycom has several AS/400 servers in their IT infrastructure running V5R2 that they wish to consolidate. The customer wants to simplify their environment and install i5/OS on a p5 590 with 16 1.65GHz processors and 20 i5/OS partitions. The customer plans to use the Advanced Power Virtualization to share their storage, processors, and memory.
What considerations and limitations should be reviewed with the customer before the purchase?（）
A.Resources cannot be shared with an i5 partition when it is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. V5R3 OS or later is required. There is a maximum of two partitions in a 590.
B.Resources cannot be shared between partitions when i5/OS is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. i5/OS can be at V5R2 or a V5R3. Currently only one i5 partition is allowed.
C.V5R3 is required for the i5 partitions. Virtual IO Server is not supported for the i5/OS partitions to share storage. Up to 10 i5 partitions per processor are allowed (a maximum of two processors for up to 20 partitions).
D.Processor and memory resources can be shared between AIX 5L, Linux and i5/os partitions. i5/OS needs to be at V5R3, and Virtual IO Server is not supported for the i5/OS partition to share storage. On a 1.65 GHz POWER5 p5 590 there is a maximum of one partition.
Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary.
What is necessary for communication between the LPARs and the HMC?（）
A.An administrative VLAN with port 1808
B.Port 657 which must remain open to TCP/IP and UDP traffic
C.Network addresses are provided by DHCP services on the network
D.DHCP on the HMC is required to be on to communicate between LPAR and HMC
A.backup command
B.Tivoli Storage Manager
C.Tivoli Disaster Recovery Manager
D.Store mksysb images on a NIM server
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC.
What is the most probable cause of this problem?（）
A.DLPAR functions are not available for cloned partitions
B.The new partition has the same node number as the original LPAR
C.Additional filesets need to be reinstalled after the alt_disk_install cloning
D.The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
One of the mirrored disks for the root volume group has failed. Although the logical volumes are mirrored, and the bosboot command was run, the machine will not boot.
What is the most probable cause?（）
A.Quorum was not turned off
B.Paging space was not mirrored
C.The dump space was not mirrored
D.The surviving disk was too small
While planning the logical volume design of a new install, Companycom considered using a striped logical volume for performance. They want to be able to extend the logical volume in the future.
Which of the following actions will provide this capability?（）
A.Add additional logical volumes two at a time
B.Add additional physical volumes two at a time
C.Create a columned striped logical volume using -C option of mklv
D.Create an extendable striped logical volume using -E option of mklv
A.Backup critical console data
B.Backup a bootable image to tape
C.Create mksysb image and store on a NIM server
D.Create mksysb image and store on an NFS server
最新试题
In addition to the partition profile backup, how should the HMC be backed up to provide bare-metal restore capabilities?（）
A company wants to buy memory efficiently on their p5 590 to allow for the best performance. What is the best practice for adding memory for performance?（）
Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux.How would access be provided to the storage subsystem devices for this Linux LPAR?（）
Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?（）
Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?（）
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped.What is the most probable cause?（）
Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained.How should the Virtual IO Server's shared processor LPAR be configured?（）
Companycom has purchased a p5 590 with 16 CPUs. To run Simultaneous Multi-Threading (SMT) with a 4-way virtual processor partition with 2.0 processing units of entitlement, how many logical CPUs will be allocated?（）
Micro-Partitioning can be defined as（）.
Companycom needs to run a 32 bit kernel under AIX 5.3. What steps need to be done to accomplish this with the least disruption since the system is already installed with a 64 bit kernel?（）