A.Install more cards of smaller capacity and same size across MCMs. Use DDR2(dual data rate) memory if using HPC (High Performance Computing).
B.Install fewer cards of larger capacity of the same size across MCMs. Servers with one processor book must have a minimum of four memory cards installed.
C.Intermix DDR1 and DDR2 memory so that partitions requiring the higher performance can take advantage of them. Half of the available memory slots in the system should contain memory.
D.Use fewer higher density memory cards so that a few memory slots are left open for future growth. Each processor book provides sixteen memory card slots. The p5 590 supports a maximum of 64 memory cards.
您可能感兴趣的试卷
你可能感兴趣的试题
A.pSeries eWLM can create classes while pSeries WLM can create tiers.
B.pSeries eWLM can create tiers while pSeries WLM can create classes.
C.pSeries eWLM is implemented over multiple O/S images while pSeries WLM is implemented within an individual O/S image.
D.pSeries eWLM is implemented within an individual O/S image while pSeries WLM is implemented over multiple O/S images.
A.8-way logical CPU partition, where each logical CPU has the power of 25% of a logical processor
B.4-way logical CPU partition, where each logical CPU has the power of 50% of a physical processor
C.8-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor
D.16-way logical CPU partition, where each logical CPU has the power of 25% of a physical processor
Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained.
How should the Virtual IO Server's shared processor LPAR be configured?（）
A.Capped and with a lower share
B.Uncapped and with a lower share
C.Uncapped and with a higher share
D.Capped and with no change in share
A.Provide multiple paths to all resources through 2 or more Virtual IO Servers
B.Mirror all disk resources on the Virtual IO Server to present to the client LPAR
C.Mirror all disk resources on the client LPAR to the shared SCSI on the Virtual IO Server
D.Trunk multiple Ethernet adapters on the Virtual IO Server to a single Shared Ethernet Adapter （SEA）
Companycom has plans to deploy a large database solution. Their primary requirement is minimal user access downtime. They are comparing a single server implementation with a two server deployment.
What solution would they use to avoid downtime for OS software maintenance?（）
A.Apply OS updates once a year
B.Utilize a GPFS cluster solution
C.Implement a two server deployment with HACMP
D.Install a single server implementation with HACMP failover to a second LPAR
A.Reallocate the Virtual IO Server disks to the user LPAR
B.Create a stripe-group within the Virtual IO Server to protect against disk failure
C.Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
D.Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux.
Which of the following would be the best solution to recommend?（）
A.Assign the adapter to an IO Hosting partition
B.Use AIX 5L affinity to move the application from SUSE to AIX
C.Use AIX 5.3 drivers to install the adapter in the Linux LPAR
D.Assign the adapter to an AIX 5.3 partition running Linux Affinity
Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC.
What is required to support this environment?（）
A.Free up one HMC and update the software for use with the p5 570
B.Connect the new p5 570 server to an existing HMC and manage the p690s and p5 570 from that HMC
C.Order a new HMC to support the new p5 570 server since the CR3 HMC is not supported for a p5 570
D.Backup the HMC to DVD-RAM and select HMC migrate to move all the profile data to the new HMC software
System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems.
What is the most probable cause of this problem?（）
A.The LPAR Configuration backup is corrupt
B.The LPAR Configuration has been altered using DLPAR
C.The LPAR Configuration backup was performed on a different HMC
D.The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped.
What is the most probable cause?（）
A.The uncapped weight has been set to 0.
B.The uncapped weight has been set to 128.
C.The processing unit for that partition was set to .1 processing units. A full processor was assigned.
D.The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
最新试题
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC.What is the most probable cause of this problem?（）
A large enterprise customer needs a standardized way to backup user data from multiple systems to tape. What solution will meet this need?（）
In addition to the partition profile backup, how should the HMC be backed up to provide bare-metal restore capabilities?（）
Companycom has purchased a p5 590 with 16 CPUs. To run Simultaneous Multi-Threading (SMT) with a 4-way virtual processor partition with 2.0 processing units of entitlement, how many logical CPUs will be allocated?（）
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor.What needs to be done to fix this problem?（）
Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary.What is necessary for communication between the LPARs and the HMC?（）
A company wants to buy memory efficiently on their p5 590 to allow for the best performance. What is the best practice for adding memory for performance?（）
What type of configuration can provide the best availability in a Virtual IO Server environment?（）
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped.What is the most probable cause?（）
A database application is installed on a server. The AIX default filesystem cache is not being re-used by the database. Which of the following should be used to fix this problem?（）