Companycom has plans to deploy a large database solution. Their primary requirement is minimal user access downtime. They are comparing a single server implementation with a two server deployment.
What solution would they use to avoid downtime for OS software maintenance?（）
A.Apply OS updates once a year
B.Utilize a GPFS cluster solution
C.Implement a two server deployment with HACMP
D.Install a single server implementation with HACMP failover to a second LPAR
您可能感兴趣的试卷
你可能感兴趣的试题
A.Reallocate the Virtual IO Server disks to the user LPAR
B.Create a stripe-group within the Virtual IO Server to protect against disk failure
C.Reconfigure the user LPAR to use both locally owned disk and a Virtual SCSI disk
D.Create a second Virtual IO Server and reconfigure the user LPAR to mirror across both Virtual IO Servers
Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux.
Which of the following would be the best solution to recommend?（）
A.Assign the adapter to an IO Hosting partition
B.Use AIX 5L affinity to move the application from SUSE to AIX
C.Use AIX 5.3 drivers to install the adapter in the Linux LPAR
D.Assign the adapter to an AIX 5.3 partition running Linux Affinity
Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC.
What is required to support this environment?（）
A.Free up one HMC and update the software for use with the p5 570
B.Connect the new p5 570 server to an existing HMC and manage the p690s and p5 570 from that HMC
C.Order a new HMC to support the new p5 570 server since the CR3 HMC is not supported for a p5 570
D.Backup the HMC to DVD-RAM and select HMC migrate to move all the profile data to the new HMC software
System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems.
What is the most probable cause of this problem?（）
A.The LPAR Configuration backup is corrupt
B.The LPAR Configuration has been altered using DLPAR
C.The LPAR Configuration backup was performed on a different HMC
D.The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed
The System Administrator has set up shared processors on three partitions in the p5 590 system. The shared processors have been set to uncapped. The system administrator notices that the logical partition is acting like it is capped.
What is the most probable cause?（）
A.The uncapped weight has been set to 0.
B.The uncapped weight has been set to 128.
C.The processing unit for that partition was set to .1 processing units. A full processor was assigned.
D.The processing unit for that partition was set to 0.50 processing units. A full processor was assigned.
A.lsmap -all -net
B.lsclient -disk -net
C.lsdev -virtual -client
D.lsmap -all; lsmap -net
Companycom is moving their application to a p5 590 and at the same time moving to a new version of the application. The customer knows only about the resource requirements of the old version.
Which of the following is the best method to migrate their application to POWER5?（）
A.Add CPU and memory COD so they have room to grow if required
B.Make the server configuration twice as large as the current requirement
C.Configure the server for the current capacity requirements
D.Make the server configuration a little larger than the current capacity requirements
Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC.
Which of the following will allow them to connect all servers to the HMC?（）
A.An 8-port adapter to the HMC
B.A hub for the private network
C.An additional Ethernet card to the HMC
D.An additional Ethernet card for each partition
Companycom is migrating from a p690 to a p5 595 utilizing APV Virtual IO features. They have created their profiles for their two Virtual IO Servers. The first Virtual IO Server is installed and running. When trying to DLPAR the DVD/ROM the task fails on the HMC.
What is the probable cause?（）
A.APV key is not registered
B.Networking and DNS are not configured
C./etc/hosts table on HMC is not configured
D.Virtual IO Server dose not support DLPAR
A.vmo to adjust the maxperm value
B.schedo to adjust the mempool size
C.ioo to modify the maxpgahead value
D.bosboot to reassign the memory cache size
最新试题
Companycom is using shared processor LPARs exclusively, including the Virtual IO Server. The users are complaining about response time. The application LPARs can be heavy processor users. The Virtual IO Server has been measured to be processor constrained.How should the Virtual IO Server's shared processor LPAR be configured?（）
Companycom needs to run a 32 bit kernel under AIX 5.3. What steps need to be done to accomplish this with the least disruption since the system is already installed with a 64 bit kernel?（）
If using alt_disk_install to install AIX on new LPARs, which of the following will be necessary after booting the new AIX image?（）
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor.What needs to be done to fix this problem?（）
Companycom is purchasing a 64-way p5 595. They have determined the location for the server is in a datacenter which does not have a raised floor.Which of the following would best meet the server requirements?（）
In addition to the partition profile backup, how should the HMC be backed up to provide bare-metal restore capabilities?（）
Companycom has several CR3 HMCs managing their p690 servers. They have purchased a new p5 570 and would like to manage the new system with an existing HMC.What is required to support this environment?（）
Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC.Which of the following will allow them to connect all servers to the HMC?（）
Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?（）
Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary.What is necessary for communication between the LPARs and the HMC?（）