Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux.
How would access be provided to the storage subsystem devices for this Linux LPAR?（）
A.Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive
B.Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server
C.Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition
D.3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution
您可能感兴趣的试卷
你可能感兴趣的试题
A.multiple partitions that share the processing power of a set of physical processors where a partition can be assigned as little as 1/2 of a physical processor's resource.
B.multiple partitions that share the processing power of a set of physical processors where a partition can be assigned as little as 1/100th of a physical processor's resource.
C.an advanced virtualization feature of POWER5 systems with Linux (SUSE and Red Hat for POWER) and AIX 5L Version 5.3 that allows multiple partitions to share the processing power of a set of physical processors.
D.an advanced virtualization feature of POWER5 systems with Linux (SUSE and Red Hat for POWER) and AIX 5L Version 5.2 or 5.3 that allows multiple partitions to share the processing power of a set of physical processors.
A.Dedicated and never Virtual processors are used in Virtual IO Servers partitions
B.Dedicated processors are whole processors that are assigned to a single partition
C.Dedicated processors are fractions of whole processors that are dedicated to a single partition
D.Dedicated and Virtual processors are interchangeable concepts, both are whole physical processors used in virtual and dedicated LPARs
A p5 570 12 way was purchased with the plan to install six LPARs running AIX 5.2. The machine has 12 disks spread evenly over the internal server drawers. The customer would now like to add a seventh LPAR.
Which of the following should be added for the seventh LPAR boot device?（）
A.An additional 7311-D10 drawer
B.An adapter to boot off a SAN device
C.An additional disk to the media bay
D.Two disks to the internal configuration
A.Create a mksysb backup of the original and restore it to the new partitions
B.Use NIM to load the additional partitions from an image of the original partition
C.Create alt_disk_install clones of the original partition and assign the target disks to the new partitions
D.Use the split mirror function to split off additional copies of the original partition and assign them to the other partitions
Companycom is purchasing a 64-way p5 595. They have determined the location for the server is in a datacenter which does not have a raised floor.
Which of the following would best meet the server requirements?（）
A.The server must be installed into a location with a raised floor for optimum system cooling and cable management.
B.The server should be purchased as a p5 590 and then upgraded to a p5 595. This will eliminate the need for a raised floor environment.
C.The server should be purchased as 32-way p5 595 and then upgraded to a 64-way. This will eliminate the need for a raised floor environment.
D.The server can be installed into a location without a raised floor if an RPQ is obtained. It is a strong IBM recommendation for a raised floor, not a requirement.
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor.
What needs to be done to fix this problem?（）
A.Enable DHCP server on the HMC
B.Configure host name and IP address on DNS server
C.Manually set the IP address of the service processor
D.Connect a RS-232 cable from the HMC to the service processor
Companycom has several AS/400 servers in their IT infrastructure running V5R2 that they wish to consolidate. The customer wants to simplify their environment and install i5/OS on a p5 590 with 16 1.65GHz processors and 20 i5/OS partitions. The customer plans to use the Advanced Power Virtualization to share their storage, processors, and memory.
What considerations and limitations should be reviewed with the customer before the purchase?（）
A.Resources cannot be shared with an i5 partition when it is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. V5R3 OS or later is required. There is a maximum of two partitions in a 590.
B.Resources cannot be shared between partitions when i5/OS is put on a pSeries. The i5 partition needs its own 9411-100 tower because of IOP. i5/OS can be at V5R2 or a V5R3. Currently only one i5 partition is allowed.
C.V5R3 is required for the i5 partitions. Virtual IO Server is not supported for the i5/OS partitions to share storage. Up to 10 i5 partitions per processor are allowed (a maximum of two processors for up to 20 partitions).
D.Processor and memory resources can be shared between AIX 5L, Linux and i5/os partitions. i5/OS needs to be at V5R3, and Virtual IO Server is not supported for the i5/OS partition to share storage. On a 1.65 GHz POWER5 p5 590 there is a maximum of one partition.
Companycom is installing a p5 590 with a HMC to manage LPARs. The customer is very concerned about security and wants to restrict network traffic that is not necessary.
What is necessary for communication between the LPARs and the HMC?（）
A.An administrative VLAN with port 1808
B.Port 657 which must remain open to TCP/IP and UDP traffic
C.Network addresses are provided by DHCP services on the network
D.DHCP on the HMC is required to be on to communicate between LPAR and HMC
A.backup command
B.Tivoli Storage Manager
C.Tivoli Disaster Recovery Manager
D.Store mksysb images on a NIM server
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC.
What is the most probable cause of this problem?（）
A.DLPAR functions are not available for cloned partitions
B.The new partition has the same node number as the original LPAR
C.Additional filesets need to be reinstalled after the alt_disk_install cloning
D.The speed and duplex settings on the Ethernet adapter on the new LPAR is misconfigured
最新试题
When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?（）
Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak. What is the best configuration to fully utilize the processor resource?（）
What type of configuration can provide the best availability in a Virtual IO Server environment?（）
In addition to the partition profile backup, how should the HMC be backed up to provide bare-metal restore capabilities?（）
One of the mirrored disks for the root volume group has failed. Although the logical volumes are mirrored, and the bosboot command was run, the machine will not boot.What is the most probable cause?（）
Companycom recently ordered a p5 570 and an HMC. Prior to delivery, two additional p5 570 servers were added to the order. Upon installation, the system administrator noticed that they do not have a method to connect the p5 570 servers to the HMC.Which of the following will allow them to connect all servers to the HMC?（）
A company wants to buy memory efficiently on their p5 590 to allow for the best performance. What is the best practice for adding memory for performance?（）
Companycom is moving their application to a p5 590 and at the same time moving to a new version of the application. The customer knows only about the resource requirements of the old version.Which of the following is the best method to migrate their application to POWER5?（）
Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor.What needs to be done to fix this problem?（）
A client is experiencing issues after cloning an LPAR using alt_disk_install. DLPAR functions are not available for the new LPAR. Also, there is a lot of network traffic to the HMC.What is the most probable cause of this problem?（）