A.fire-tubes
B.furnaces
C.down-comers
D.soot-blowers
您可能感兴趣的试卷
你可能感兴趣的试题
A.The domestic water
B.Bilge water
C.Oil transfer
D.The ballast
A.A cut-off lever
B.A swivel block
C.A cross-head
D.A driving gear
A.the piston rod
B.the tiller arm
C.the connecting rod
D.the rudder
A.fouled tubes in shell and tube condenser
B.too little or too warm condenser water
C.air or non-condensable gas in system
D.overcharge of refrigerant
A.The winch motor
B.The band brake
C.The winch barrel
D.The anchor capstan
A.The cable lifter
B.The hoisting motor
C.The topping wire
D.The life-raft
A.stays
B.winches
C.barrels
D.brakes
A.fire-tubes
B.furnaces
C.water drums
D.water wall tubes
A.The three moving vanes and the three fixed vanes form three pressure chambers
B.The three moving vanes and the three fixed vanes form six pressure chambers
C.The three moving vanes and the three fixed vanes form nine pressure chambers
D.The three moving vanes and the three fixed vanes form twelve pressure chambers
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
![](https://static.ppkao.com/ppmg/img/appqrcode.png)
最新试题
The rate of heat transfer from a hot region to a cold region is affected most by the ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
An excessive charge of refrigerant in an air-cooled refrigeration system can cause ().
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should ().
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()
The usual symptoms of cavitation in a centrifugal pump is ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().