A.using a slightly dirty air filter
B.using oil having an excessive viscosity
C.intercooler or after-cooler leaks
D.carrying the oil level higher than normal
您可能感兴趣的试卷
你可能感兴趣的试题
A.increased capacity of the compressor
B.more efficient operation of the thermal expansion valve
C.decreased capacity of the compressor
D.loss of receiver capacity
A.damage to the un-loader operating diaphragm
B.an increase in current flow to the motor
C.high pressure in the receiver and filter
D.an excessive consumption of crankcase oil
A.first stage
B.second stage
C.distillate cooler
D.salt water feed heater
A.Gravity siphon effect
B.Higher vacuum in the second-stage
C.Difference in brine density between first and second stages
D.lower pressure in first-stage
A.decreased compression ratio
B.higher than normal power consumption
C.un-loader malfunction
D.water in the lubricating oil
A.reduce friction between moving surfaces
B.provide even distribution of bearing wear
C.reduce the accumulation of harmful detergents
D.maintain a constant oil temperature output at each beating
A.vapor feed heater
B.air ejector condenser
C.saltwater heater
D.distillate cooler
A.ballast tanks
B.sludge tanks
C.machinery space bilges
D.cargo hold bilges
A.excessive drive motor speed
B.excessive pump discharge pressure
C.too low of a tilting box angle
D.insufficient drive motor speed
A.high pressure liquid
B.low pressure vapor
C.high pressure vapor
D.low pressure liquid
最新试题
Low compressor head pressure in a refrigeration system can be caused by（）.
One cause of high head pressure occurring in a refrigeration system can be （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
The general purpose of a heat exchanger is to （）.
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.