A. Adapter FEX is a software feature that can be configured on any CNA as long as the Nexus 5000 is running a version of code that supports Adapter FEX
B. Adapter FEX can be thought of as a way to divide a single physical link into multiple virtual links or channels.
C. Packets on each channel are tagged with an 801.Q header that has a specific source VIF
D. When using a dual-homed NIC on the server, active/standby is not supported. Only active/active is supported.
您可能感兴趣的试卷
你可能感兴趣的试题
Refer to the exhibit.
Given this FCoE topology, host VFC interface and FC storage are in the same VSAN (VSAN 10).The VSAN is in the allow list for both ISLs. Both ISLs are up at 4 GB.
Which command can be issued on the N5K command line to confirm that SCSI traffic from the host to the storage will flow across both links, as opposed to using only one link?()
A. show fspf traffic vsan 10
B. show vsan 10
C. show trunk protocol
D. show fcroute unicast vsan 10
A. port security
B. fabric binding
C. IVR
D. port tracking
E. FICON
A. Two peer devices: the vPC peers of which one is primary and one is secondary and are part of a vPC domain.
B. A Layer 3 Gigabit Ethernet link called peer-keepalive link to resolve dual-active scenarios
C. A redundant 10 Gigabit Ethernet PortChannel called a peer link to carry traffic from one system to the other when needed
D. vPC member ports forming the PortChannel
E. A dot1q trunk between the vPC peers
F. A management port that can be used as peer-keepalive link to resolve dual-active scenarios.
A. The Ethanalyzer captures control-plane traffic, while SPAN captures all traffic.
B. The Ethanalyzer captures all traffic including control-plane traffic, while SPAN captures only the control-plane traffic.
C. The Ethanalyzer captures only data traffic, while SPAN captures all traffic.
D. The Ethanalyzer captures only control traffic, while SPAN captures data traffic.
A. show memory detailed
B. show process cpu sorted
C. show system resources
D. show hardware capacity
A. show interface priority-flow-control
B. show interface queuing
C. show queuing interface
D. show policy-map system type queuing
E. show policy-map interface ethernet
Nexus7000# config t
Nexus700(config)# interface ethernet 2/11
Nexus700(config-if)# switchport mode private-vlan host
Nexus700(config-if)# switchport private-vlan host-association 14 50
Nexus700(config-if)# exit
Nexus700(config)#
What will this command sequence achieve?()
A. associate interface E2/11 to community VLANs 14 and 50
B. associate interface E2/11 to secondary VLANs 14 and 50
C. associate interface E2/11 to primary VLAN 50 and secondary VLAN 14
D. associate interface E2/11 to primary VLAN 14 and secondary VLAN 50
A. Port priority value can be configured between 1 and 65535.
B. A higher port priority value means a higher priority of LACP.
C. Port priority can be configured so that specific links can be chosen as active links rather than the hot standby links within the port channel.
D. LACP uses the port priority with the port number to form the port identifier.
E. LACP Port priority default value should always be changed
A. Cisco AV-pair
B. TACACS+ or RADIUS ack frame role attribute
C. DH-CHAP challenge attribute
D. privilege level attribute
A. Graceful consistency check is enabled by default.
B. When graceful consistency check is enabled, only the links on the secondary peer device are suspended.
C. Graceful consistency check is disabled by default, so to enable this feature, use graceful consistency-check command under VPC domain configuration mode.
D. When graceful consistency check is enabled, only the inconsistent VLANs on the secondary peer device are suspended.
最新试题
Which statements are true regarding the Cisco UCS fabric failover feature? ()
What is the appliance port used to connect to in a Cisco Unified Computing System?()
Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager? ()
Given a Cisco Unified Computing System, which is a valid port type in end-host mode?()
When testing ICMP access to a functional load-balancing ACE VIP, it fails. What is the reason of this problem? ()
Where are SAN Port Channel is created in UCS Manager?()
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS?()
Which of the following are supported in Cisco Global Site Selector? ()
In the event of a GSS failure in a GSS cluster, which is true?()
Given the following output: san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24:0c:00:0d:ec:d3:5c:00 Admin port mode is NP, trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] : fc2/3 Member[2] : fc2/4 What does "Speed is 8 Gbps" indicate?()