A. minimum cell rate (MCR)
B. quality of service (QoS)
C. modulation
D. packet switching exchange (PSE)
E. reliable transport protocol (RTP)
您可能感兴趣的试卷
你可能感兴趣的试题
A. bandwidth
B. delay
C. load
D. reliability
A. atm-dxi
B. frame-relay
C. hdlc
D. lapb
E. ppp
A. show protocols
B. show process
C. show system
D. show version
A. debug icmp
B. debug ip icmp
C. debug tcp
D. debug packet
A. show ip route
B. show route
C. traceroute
D. trace ip route
A. enable cdp
B. cdp enable
C. cdp run
D. run cdp
A. ip route 172.16.1.0 255.255.255.0 0.0.0.0
B. ip route 172.16.1.0 255.255.255.0 172.16.2.1
C. ip route 0.0.0.0 255.255.255.0 172.16.2.1
D. ip route 0.0.0.0 0.0.0.0 172.16.2.1
A. NVRAM
B. RAM
C. FLASH
D. ROM
E. PCMCIA
A. copy running-config: TFTP:
B. copy TFTP: running-config
C. copy TFTP: startup-config
D. copy startup-config: TFTP:
A. copy running-config startup-config
B. copy startup-config: running-config
C. copy running config startup config
D. copy startup config running config
E. write terminal
最新试题
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?()
Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?()
What is the default administrative distance of OSPF?()
At which layer of the OSI model dose PPP perform?()
On which options are standard access list based?()
You have been asked to come up with a subnet mask that will allow all three web servers to be on the same network while providing the max number of subnets.Which network address and subnet mask meet this requirement?()
What is the purpose of the cisco Vlan Trunking protocol?()
What is the subnetwork address for a host with the IP address 201.100.5.68/28?()
The network administrator cannot to switch 1 over a telnet session,although the hosts attached to switch 1 can ping the interface Fa0/0 of the router.Given the information in the graphic and assuming that the router and switch2 are configured properly,which of the following commands should be issued on switch 1 to correct this problem?()
While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?()