A. mail server
B. DNS server
C. web server
D. WINS server
E. DHCP server
您可能感兴趣的试卷
你可能感兴趣的试题
A. RAID
B. tape library
C. optical storage
D. disk to disk to tape
A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server, the technician discovers that the operating system does not detect the drive.
After rebooting the server, the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.
Which action should the technician take next?()
A. backup the BIOS configuration to use later
B. install the BIOS update from a command prompt
C. create a bootable floppy and copy the BIOS update tools to the floppy
D. read the manufacturer’s guidelines and recommendations on installing the update
A. MIB (Management Information Base)
B. OID (ObjectIDentifier)
C. register
D. community name
A. The SCSI card is not seated correctly.
B. The termination is incorrectly set on the SCSI card.
C. The SCSI card is not listed on the operating system HCL (Hardware Compatibility List).
D. Operating system patches were not updated before installing the card.
A company plans to upgrade a network server. Before proceeding with the upgrade, the HCL (Hardware Compatibility List) and hardware is checked and necessary backups and documentation are made.
The existing 512 MB of SDRAM is replaced with 1024 MB. The 10 Mbps network card is replaced with a 10/100 PCI network card. When the server restarts, beeps sound and the server does not pass the POST. Which of the following is the MOST likely cause of the problem?()
A. The memory is not seated correctly.
B. The network card is not configured correctly.
C. The server does not support 1024 MB of memory.
D. Master SDRAM ECC needs to be enabled in the CMOS.
A. server as a bridge
B. server as a router
C. server as a switch
D. server as a data link
Click the Exhibit button.
From a local machine, connectivity with a server named server1.comptia.org is checked. It cannot be reached, but it can be accessed via the IP address.
Which of the following is the MOST common cause of this error?()
A. The server is down.
B. The DNS server is down.
C. The local DNS cache is full.
D. The local DNS client is stopped.
E. The local DNS cache is corrupted.
A. disk utilization
B. installation date
C. adapter baselines
D. location slot of the RAID controller
E. status of the adapter card installation
F. RAID controller information (warranty, specifications etc.)
最新试题
Why is it important to have a final meeting on a project that has been cancelled?()
The project sponsor wants the project manager to develop and implement Quality Management techniques to ensure a smooth project transition to the deployment phase. What is an appropriate Quality Management technique to implement?()
A large corporation is concerned about the amount of time it takes to back up their main file server. They are also concerned that their IT technician frequently forgets to change the backup tapes, thereby leaving the company open to data loss. Which backup system would solve both problems?()
Which action increases server availability?()
Which factor has the greatest impact on the estimated per unit labor cost for a project?()
Which RAID standard combines data striping across drives with mirroring?()
Within Information Technology projects, communications between the project manager and the project team members should take place:()
The last deliverable at the Close Out meeting is:()
The current data center has run out of space. A room that is located next to the existing data center is then used to house two racks containing six servers. Six months later, physical housekeeping is performed as part of a mid-year maintenance plan. Which environmental condition discovered in the room is LEAST critical?()
A customer wants to increase the performance of an existing server. They are running a very network intensive application and feel that increasing the bandwidth to the network will fix their problem. They are running two 24-port autosensing 10/100 hubs, tied together with a standard Ethernet crossover cable in port 24. The server is running IPX. After adding a second network card and plugging one card into each hub, they have not seen any performance improvement. Which two are likely reasons why implementing network adapter teaming has not improved performance?()